How do I get logs from Iris panels via the ccm

Owned by ernie addow
Last updated: Apr 09, 2021
2 min read

Below is instructions for getting logs from CCM for the IRIS panels,

  1. Connect a PC to the same network so it can reach the panel.

  2. Enter the panel’s IP address in a browser. This should get you to the panel’s CCM.

  3. Log in with

user: admin      

password: <mDNS number>

ie password == 04YYP931,

 

 

this is not the s/n on the unit but the mDNS hostname. You can find the mDNS hostname if you disconnect the panel from the network and look in the bottom right hand corner of the display

 

4. Goto Device -> Maintenance and click on ‘support info’, then continue

5. Wait for the support info to be prepared for download. This should take 20 seconds or so. Then hit download file link.

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.