/
Arcadia GPI 1 and 2 Wiring

Arcadia GPI 1 and 2 Wiring

    Translate page

    To wire the GPIs on the Arcadia, first jumper Pin 4 (A1 or A2) to the 12V supply on Pin 9.

    This supplies voltage to the Arcadia to Trigger GPI 1 or GPI 2 when the corresponding contact, Pin 5 (B1 or B2), is closed to ground (DB9 shield).

    The only tricky part of this setup is the ground connection—there is no dedicated ground pin. Ground must be tied to the DB9 shield/shell.

    Pin 5 and the DB9 shield should be wired to your external contact closure (e.g., a footswitch). When the contact closes, the 12V is routed to the Arcadia, triggering the GPI.

    A1/B1 are used for GPI 1, and A2/B2 are used for GPI 2.

    image-20260116-183805.png
    image-20260116-183948.png
    image-20260116-184136.png

     

      CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

      This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

      The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.