/
Arcadia: How to check Arcadia logs IP Address

Arcadia: How to check Arcadia logs IP Address

  • APPROVED

    • See the notes below for checking the Arcadia logs for the IP address used in Arcadia.

     

     

    image-20251205-120529.png

     

     

     

    Goto Data\etc\moonraker\netcfg\host folder and open the NetPortSettings.cfg.old file

    : this will show you the IP config settings for the Arcadia LAN ports 1-4

    image-20251207-195307.png

    in this example the AES67 LAN port is set to DHCP , and the DHCP setting can be found by

    Goto Data\etc\systemd\network folder and open the aeshps.network file

     

    Please note it is good practice to give HOST devices like Arcadia , FSII basestations, Matrices and IPA cards fixed static IP addresses and set the end points to DHCP mode , where a DHCP server will assign them the correct IP address

    Do NOT set the static IP address of the HOST devices in any of the reserved IP ranges

    See FAQ (and below) for restricted IP addresses https://clear-com.atlassian.net/wiki/spaces/SF/pages/2166521865

    See FAQ https://clear-com.atlassian.net/wiki/spaces/SF/pages/2077393025

    See FAQ https://clear-com.atlassian.net/wiki/spaces/SF/pages/2059042817

    See FAQ : https://clear-com.atlassian.net/wiki/spaces/SF/pages/2183069697

    see FAQ : https://clear-com.atlassian.net/wiki/spaces/SF/pages/edit-v2/2568585256

     

     

    CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

    This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

    The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.