/
Arcadia: How to configure the Arcadia CCM with a 4-wire port linked to a radio?

Arcadia: How to configure the Arcadia CCM with a 4-wire port linked to a radio?

  • APPROVED

    • Here is how to configure in CCM:

    To configure the Arcadia CCM with a 4-wire port connected to a radio, please follow these steps:

    Step (1):

    Set the 4wire port as shown below in the Resources > Physical Ports .

    image-20250513-122422.png

     

    Step (2):

    Associate the 4wire port (Labeled as:4W1Radio1) to the Channels.

    image-20250513-123236.png

     

    Step (3):

    Set the Control Logic as shown below to activate the Arcadia TALK key to Action the CALL action

    image-20250513-132122.png

    The image below illustrates that the TALK key for Channel 1 at Arcadia Station is active and communicating with 4W1Radio1.

    image-20250513-134541.png

     

    Please refer to the additional solutions provided below:

    Arcadia : How do I configure in Arcadia CCM to connect to Radio

     

    CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

    This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

    The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.