Arcadia: Can I use Arcadia to connect to my RTS partyline system
Yes, the 2wire partyline ports on the Arcadia can be set into RTS mode
select the two wire port and set the mode to Clear-Com or RTS
In the CCM set the partyline mode to RTS - In RTS mode, XLRA and XLRB are commoned together on all pins internally.
Set 2wire A/B to RTS mode in the CCM
use a standard 1:1 XLR cable
Connect your XLR cable from Arcadia 2wire (A) to the RTS 2W betpack (BP325) , do not connect anything to the Arcadia 2wire (B)
See Arcadia manual https://www.clearcom.com/downloadcenter/manuals/Arcadia_Online_Manual/Content/ArcadiaTopics/Introduction%20to%202-Wire%20Systems.htm
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.