Matrix: Where should I fit the Fiber card in Eclipse Matrix ?
Here is the information on how to install the Fibre card in the Eclipse Matrix:
Navigate to Hardware > Cards and Ports. A drop-down menu will appear, displaying the available card types.
Select either E-FIB (Fiber) or E-FIB (Redundant).
Note: Only one E-FIB (Fiber) and one E-FIB (Redundant) card can be installed at a time.
Clear-Com recommends installing the E-FIB cards in the following slots:
Eclipse HX-Median matrices: Slots 6 and/or 7
Eclipse HX-Omega matrices: Slots 14 and/or 15
Eclipse HX-Delta matrices: Slot 4
Do not install other matrix card after you have installed your E-FIB , this stops your trunklines between frames getting our of sync if you add more cards into slots after the E-FIB card .
Having empty slots in front of the E-FIB to allow you to expand later on is better
Related content
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.