Mentor RG : What parts do I need to order for Mentor RG PTP GM with GPS

By ernie addow
  • APPROVED
    • 2 min

    Part# correct Jul 14, 2024

     

    The following items should be ordered

    See Clear-Com website Mentor RG for more details

     

    Part #

    Description

    Extra Detail

    Description

    Quantity

    REFERENCE AND TEST SIGNAL GENERATORS

     

     

     

    360-00-07

    MENTOR RG SIGNAL GEN BASE UNIT WITH SINGLE PSU

    Note the new dual 1Gb Ethernet ports

    Mentor RG Sync Pulse Generator
    PTP/IEEE-1588 compatible via keycode option
    Includes Vector Remote Configuration Browser
    Base unit supplied with single power supply.
    Facilities :

    • Genlock loop thru

    • 10/5MHz/TLS ref input

    • 5 x black/burst (outputs 4&5 switchable to TLS)

    • 3 x SD-SDI black

    • 27/10MHz/Word Clock output

    • 2 in/2 out GPI     

    • Dual 1Gb Ethernet ports

    • All SDI and analogue outputs individually timetable                      

    • Simultaneous 525/60 and 625/50 operation



    1

    MENTOR SOFTWARE LICENSE OPTIONS

    360-21-00

    MENTOR RG SIGNAL GEN PTP PRECISION TIME PROTOCOL

     

    Mentor RG (only) Software Option : Precision Time Protocol (PTP IEEE-1588)
    Software option to provide PTP output

    1

    MENTOR BOARD OPTIONS

    360-09-05

    MENTOR RG SIGNAL GEN REDUNDANT POWER SUPPLY

     

    Mentor RG (only) Redundant Power Supply Module

    1

    MENTOR GPS REFERENCE OPTIONS (RG and XL compatible)

    Note: There are two  antenna options that may be specified for use with the 360-15-12 GPS Time Reference: Passive (up to 80m) and Smart (active to 300m)

    PASSIVE GPS ANTENNA

    360-15-12

    MENTOR RG/XL SIGNAL GEN TIME REF GPS BOARD

     

    Mentor RG and XL GPS Time Reference Board
    Refer to antenna options below
    For use with either Passive 5v antenna or the Smart antenna . Suitable types available from Trimble <http://www.trimble.com >
    Also activates the 2 x AES unbalanced outputs when 360-11-00 or360-23-00 option is included
    Note : A firmware update (360-90-00) is required when adding this option to Mentor units

    option

    SMART (ACTIVE) GPS ANTENNA AND RECEIVER

    360-15-15

    MENTOR RG/XL SIGNAL GEN GPS+ ANTENNA + UNI MOUNT

     

    GPS Smart Antenna & Universal Mount
    Includes :
    1 x 360-15-06 Antenna Cable Adaptor For Single/Dual Mentor RG or XL
    1 x 360-15-07 Mating 12 pin cable mtg connector
    Trimble Acutime Smart antenna & receiver in weatherproof and corrosion resistant housing
    Dims : 95 (dia.) x 72.5 (h) mm
    Complete with screw in, reinforced nylon mount (height 100mm)
    Suitable cable type for up to 300m : BATT 35102
    Note : For use with 360-15-12 GPS Time Reference card only.
    Refer to factory for use with earlier 360-15-10 and 360-15-11 GPS Time Reference cards

    1

    360-15-07

    MENTOR RG/XL SIGNAL GEN MATING CONN FOR GPS+ ANT

     

    Mating Connector For GPS Smart Antenna (360-15-15)
    Comprises Deutsch 12 pin IMC26-2212X
    plug, crimp socket & boot.

    1

    Related content

    CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

    This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

    The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.