/
GEN-IC : Delay in restoring a link group after Gen-IC port change
  • APPROVED

    • GEN-IC : Delay in restoring a link group after Gen-IC port change

    Owned by Sandrine Futcha
    Last updated: Jul 11, 2024 by ernie addow
    1 min read

    Known Limitation

    Using GEN-IC ver 1.0.xxx

    If your GEN-IC instance is the leader of a link group,

    If it is restarted (start / stop) the GEN-IC may experience a TCP port change after start up, the link group will be momentarily broken. All the members of that link group will have temporarily lost their leader. You may have to wait for up to 5 minutes to have the link group restored with the leader accessible.

     

     

    The GEN-IC instance port may change each time you start / stop the instance

     

     

    image-20240711-211059.png

     

     

    image-20240711-211808.png

     

    Related content

    CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

    This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

    The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.