Matrix: V-Iris panel Auxiliary power on DB25 audio connector

By ernie addow
  • APPROVED
    • 2 min

    Pin 13 on the V-Iris rear Aux audio connector can provide Auxiliary power with 0.2A re-settable fuse (polyfuse). This can be used to power external Microphones

     

     

    image-20240402-202804.png

     

     

     

    Two jumper switches on the MAIN board select the power that runs to pin 13 of the audio connector DB25:

     

    J38 - selects either GND or Power to pin 13

    • 1-2 = select power (power is selected by J49)

    • 2-3 = select GND

     

    J49

    • 1-2 = select 5VA power

    • 2-3 = select 12V power

    power via a 0.2A resettable fuse (polyfuse).

     

    the default setting is GND (0v) on pin 13

    Note : units built before April 2024 may have had pin 13 set to +5V at the factory

    if 0v is required use pins 5,6,18,19 instead

    Switch #4 on the main board is to enable or disable headset detect for HS1 and HS2

    Matrix: Is it possible to disable the headset detect on the V-series panel

     

     

    image-20240402-203302.png

     

     

     

     

    image-20240402-204452.png

     

     

    Related content

    CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

    This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

    The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.