/
Lawo: IP Networking Guide For Video and Audio Applications

Lawo: IP Networking Guide For Video and Audio Applications

  • APPROVED

    •  

    Lawo : Transporting audio and video streams over IP networks creates requirements beyond the well-known settings for e.g. office networks. This guide outlines general aspects of networking as well as the specifics needed for the correct transport of real-time audio and video data over standard IP networks. Even though the guide uses Lawo devices as examples for specific settings, these are also applicable for equipment from other brands.

    This document covers setups for Lawo devices but the general principles can be applied to Clear-Com AOIP devices

     

    link : https://lawo.com/Downloadery/89_Reference_Material/IP_Networking_Guide_for_Video_and_Audio_Applications_EN.pdf

     

    TOPICS:
    IP Networking – General Overview
    Bandwidth – Latency – Packet Delay Variation

    Multicast
    Overview – Querier Election – Multicast Router port

    PTP
    Overview – Profiles

    Quality of Service
    Overview – DiffServ

    Switches
    Requirements (Bandwidth, QoS, Spanning tree, PTP, Multicast, Performance) – Settings – Limitations – Switch models

    Specific Switch Configurations
    Cisco SG300 – Arista (PTP E2E) – Artel Video Systems ARG Quarra Switches

    Troubleshooting

     

     

    CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

    This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

    The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.