Kenwood 5-Pin PTT

The steps to activate a two-pin walkie-talkie are as follows.

First step:

Pin-Out for DB25 GPO:

Kenwood Pin-out:

Wiring Up:

Use a digital metre to determine which pin on the Kenwood is the wire if you're unsure which pin is which.

Step 2 :

Step 3 :

Unlatching From HelixNet main station and Beltpack.

HelixNet Beltpack Unlatching Configuration :

HelixNet main station Unlatching Configuration :

Step 4 :

Creating New Controls for Configuration. Using a relay and designating it as Trigger in a control.

Step 5 :

Including a Port Direct

Select Attached Control Options from there. In step 3, install the Relay 2 (CT001) that you created.

VOX Action ( CT001 )

Step 6 :

Go under Configuration > Local Advanced > Select the configuration you need > here is Line 2 & 3 turn it on > 3 & 2 turn it on.

To forced listen in EHX Configuration System.

EHX Set up :

Solution Finder