Helixnet : Can I place the Helixnet PGM (input) into 2 separate IFBs

By ernie addow

 

Yes this is possible, please note in HelixNet the Program Audio is cut for everyone listening to the IFB channel, not only at the IFB Destination.

 

Therefore if at your station you have access to a couple of IFBs and they are both using the same PGM input as the IFB source. Then the side effect is that if you are listening to both IFB1 and IFB2 channels and the program feeds both IFBs then cutting the program audio on one or the other has the same effect for you: no Program Audio is heard at your station

 

see also HelixNet: Why does the IFB Program dim when in a channel with a 4-wire device

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.