/
Matrix: How do I check what TCP/IP ports are connected to my Eclipse matrix
Matrix: How do I check what TCP/IP ports are connected to my Eclipse matrix
You can check which TCP/IP ports are being used from event log and run this comment
The logs will report the [IP address] and <TCP/UDP port>
|Ethernet TCP 010.050.016.042:xxxxx ]
Related content
EHX - Enabling Panel Message Monitoring via Event Log
EHX - Enabling Panel Message Monitoring via Event Log
Read with this
Matrix: New Install - How to Connect EHX to Eclipse Frame
Matrix: New Install - How to Connect EHX to Eclipse Frame
More like this
Eclipse Matrix - obtaining stack traces
Eclipse Matrix - obtaining stack traces
More like this
Matrix: What is Destination Assigner?
Matrix: What is Destination Assigner?
More like this
Matrix: New Eclipse Installation with AES67
Matrix: New Eclipse Installation with AES67
More like this
Matrix: New Install - IVC Connections
Matrix: New Install - IVC Connections
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.