Converting the FOR-22 call signal / logic input into a Control for use within EHX
Convert a call signal into a Control for use within EHX. This example demonstrates a call signal from an FOR-22, but this method can be adapted to suit any incoming call signal into a port.
In Local Advanced, set a Preset Talk between the FOR-22 port and a Dummy port.
Create a Control.
Create a Logic Diagram and configure a Xpt Trigger between the FOR-22 (source) and the Dummy port (destination).
Link this to a Control O/P and add the control we created in the previous step.
Now when the FOR-22 receives a logic input from an external device, it will activate the control (named “FOR-22 GPI” in this example).
We can use this control as normal in the EHX config.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.