FS-II: IP antennas not working on Cisco WS-2960CX-8PC-L
- Juan A. Sanchez
- Jonathan Sorensen
From a customer:
We were using FSII IP Antennas connected to CISCO WS-C3560CG-8PC-S switch and was working perfectly, however, for internal reasons, we decided to change the switch to a CISCO WS-2960CX-8PC-L. We configured the new switch the same way as the C350CG, but the antenna doesn’t work now.
Question:
Are the IP antennas compatible with the Cisco WS-2960CX-8PC-L?
Answer:
It's best to ask Cisco if the two units are the same, or what are differences there are.
See:
From a quick look at the data sheet, the PoE power is lower on 2960 , the switching bandwidth and also the base firmware are different. They have different firmware levels not sure if 2960 support the full set of QoS, multicast routing , IGMP.
As always, you should reference the Clear-Com AoIP Network Recommendations when choosing switches and other network components:
Clear-Com ST2110 / AES67 System Network Guide
Related content
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.