SIP: How do I dial out from a V-Panel using a SIP interface?
Note: The instructions below assume the matrix and the LQ-SIP device have been configured correctly.
Make sure the following has been done:
The matrix (frame) Port Function for the channel going to an LQ is configured as SIP-LQ
The LQ sip accounts are registered to the sip server
The LQ sip channels between the matrix and the LQ are connected. A green dot in the LQ device indicates the channel is up
In the LQ sip device, the LQ sip accounts and LQ-sip channels going to the frame are configured as “Directs”. This creates a one-to-one relationship
To call out from a panel:
On the panel, dial a 1 plus the number you wish to call. In some cases, you’ll need to dial a 9 after the 1 to get an outside line. If you have a 2RU or Desktop panel, you can use the dial path. For a 1RU panel, you’ll need to navigate the MENU options on the panel to be able to dial the required digits
On the panel, latch the Talk/Listen key for the SIP interface you wish to use. In the example below, it could be Phone 1 or Phone 2
Link to a video tutorial : https://clearcom.ftpstream.com/download/JKlNViE9fMENSbRKIQcf/customer/SIP_video/SIP_Guide.mp4
Related content
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.