Cisco: How to disable PoE (Power over Ethernet) mode on 9300 catalyst devices

It is good practise when installing AES67 networks to turn off the PoE (Power over Ethernet) functionality on any Ethernet-switch port that does not require it

Clear-Com recommends you disable PoE on switch ports connected to

  • Matrix CPU LAN port

  • E-IPA LAN port,

  • Iris LAN port

to avoid rare unexpected brief down/up events which affect the functionality of the unit.   

 

Example configuration for a Cisco 9300 catalyst switches, where we turn off PoE on switch port 27

 

The commands would be something like:

            configure terminal

            interface gigabitEthernet1/27              (assuming the Iris is connected on port 27 of the Cisco 9300 switch)

            power inline never

(don’t forget to save the config) : See page 7 of the attached

 

 

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.