Subnets not to be used with IPA or Iris panels
The E-IPA / IRIS panels used the following subnets (internally)
10.0.0.0/30 (IRIS and IPA)
IPs between 10.0.0.0 to 10.0.0.3
10.0.0.4/30 (IPA only)
IPs between 10.0.0.4 to 10.0.0.7
subnet /30 == 255.255.255.252
We recommend our customers not to use a network starting at 10.0.0.0.
Looking for labels? They can now be found in the details panel on the floating action bar.
Related content
CCM for IP Transceiver, Iris Panel or IPA Won't Allow 172.23.x.x Subnet
CCM for IP Transceiver, Iris Panel or IPA Won't Allow 172.23.x.x Subnet
More like this
Clear-Com: E-IPA TO IPT / IRIS PANEL BASIC LAYER 3 ROUTING
Clear-Com: E-IPA TO IPT / IRIS PANEL BASIC LAYER 3 ROUTING
More like this
E-IPA Network Topology - Admin, IVC, AoIP (AES67)
E-IPA Network Topology - Admin, IVC, AoIP (AES67)
More like this
Matrix: New Install - E-IPA Card Capabilities and Network Configuration
Matrix: New Install - E-IPA Card Capabilities and Network Configuration
More like this
V-Series IRIS Panel - IP and MAC Addresses with consideration for NAC (Network Access Control) / PNAC (Port-Based Network Access Control)
V-Series IRIS Panel - IP and MAC Addresses with consideration for NAC (Network Access Control) / PNAC (Port-Based Network Access Control)
More like this
Matrix: What are the basic steps for connecting an IP panel to a matrix
Matrix: What are the basic steps for connecting an IP panel to a matrix
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.