Upgrading the E-IPA-HX Card

The E-IPA card must be upgraded from the EHX software.
The admin port of the E-IPA card must be on the same subnet as the EHX PC .


If there is an interruption to the power supply of the E-IPA-HX card during the upgrade or you try to make a map download, the card will go into recovery mode.

It can take upto 20mins for the upgrade to complete.

The IPA card may reboot several times during the upgrade.

Please wait for the upgrade to complete and the IPA card come back to a normal state before any other actions are made on the matrix (like map downloads or other firmware downloads)


The table below shows the stages that occur during recovery mode.