/
I have Red Icon on my Antenna (IPTCVR) in the Transceivers page
I have Red Icon on my Antenna (IPTCVR) in the Transceivers page
If you have an Antenna with RED Icon, this means you have a different subnet mask for the AES67.
The beltpacks will connect to the Antenna but no audio for the beltpacks. To fix the issue you need to edit AES67 and setup same subnet mask for the AES67.
Please see the attachment
, multiple selections available,
Related content
How do I verify AES67 audio is going out of my Iris panel?
How do I verify AES67 audio is going out of my Iris panel?
More like this
Wireless: Freespeak II beltpack "System Connect" display screen messaging
Wireless: Freespeak II beltpack "System Connect" display screen messaging
More like this
How to Know If FS Edge Transceivers On Same Channel Are Too Close To Each Other
How to Know If FS Edge Transceivers On Same Channel Are Too Close To Each Other
More like this
Matrix: New Install - E-IPA Card Capabilities and Network Configuration
Matrix: New Install - E-IPA Card Capabilities and Network Configuration
More like this
How to listen to AES67 / ST2110 audio RTP Stream using Wireshark and Audacity
How to listen to AES67 / ST2110 audio RTP Stream using Wireshark and Audacity
More like this
Wireless: FS II transceiver antenna coverage capabilities / expectations
Wireless: FS II transceiver antenna coverage capabilities / expectations
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.