/
E-IPA / IVC-32 initiating connection

E-IPA / IVC-32 initiating connection

Some IT departments require devices to start an outbound connection before they will enable external communication. This can prevent some attacks but makes operations more difficult.

To have an IPA or IVC card start an outbound connection, set up a dummy IVC Direct port and make sure it is set to VoIP Caller so that whenever the card is active, it will be attempting to connect.

When we have used this, we have set the network address to either another IPA/IVC or to the address of the gateway switch; either seems to work but the latter causes fewer Event Log entries.

 

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.