/
Wireless: When we connect the DX121 to the DX200 via 4W Cat5 > dual XLR, we get a "hum".
Wireless: When we connect the DX121 to the DX200 via 4W Cat5 > dual XLR, we get a "hum".
By Administrator
Apr 06, 2019
Question: When we connect the DX121 base to the DX200 base via 4W Cat5 > dual XLR, we get a "hum", even if they stand next to each other running on the same power outlet.We haven´t tried yet but I assume we could try to put two ground lifted transformers in between. Any other suggestions/known issues?
Answer: The hum sounds like a grounding issue. The DX series products use a floating ground power supply. The rack mounted bases are not grounded by simply mounting them in a rack. All of our bases include a ground lug/point at the rear of the base and this is where your earth ground or common ground is to be attached.
Answer: The hum sounds like a grounding issue. The DX series products use a floating ground power supply. The rack mounted bases are not grounded by simply mounting them in a rack. All of our bases include a ground lug/point at the rear of the base and this is where your earth ground or common ground is to be attached.
, multiple selections available,
Related content
Wireless: One of our DX200 base stations has a 60 Hz hum when the front panel headset mic switch is engaged.
Wireless: One of our DX200 base stations has a 60 Hz hum when the front panel headset mic switch is engaged.
More like this
Wireless: Getting low level audio between a Tecpro/ ASL PL system and a DX200 basestation
Wireless: Getting low level audio between a Tecpro/ ASL PL system and a DX200 basestation
More like this
Wireless : Audio distortion between DX, LQ and HelixNet
Wireless : Audio distortion between DX, LQ and HelixNet
More like this
Wireless: CellCom 10 base has hum when connected to RTS PL system via TW-12B
Wireless: CellCom 10 base has hum when connected to RTS PL system via TW-12B
More like this
Wireless: How do I connect my DX200/ 210 wireless basestation to a Helixnext main station
Wireless: How do I connect my DX200/ 210 wireless basestation to a Helixnext main station
More like this
Wireless: I can't link my two DX bases together into primary and secondary mode.
Wireless: I can't link my two DX bases together into primary and secondary mode.
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.