/
Other: CC-110 / CC-220 Headset Specifications

Other: CC-110 / CC-220 Headset Specifications

By Administrator
Apr 06, 2019
CC-110 Single Muff Lightweight Headset














Headphone
Type: Closed-back
Driver: 36mm diameter, neodymium
magnet, copper-clad aluminum wire voice coil
Frequency Response: 20Hz v- 20kHz
Microphone
Element: Dynamic
Driver: 15mm, neodymium magnet
Polar Pattern: Cardioid
Frequency Response: 250Hz - 20kHz
Sensitivity
Open Circuit Sensitivity: -64 dB ±3.5 dB; at 1kHz, typical
CC-110: 99 dB ±3 dB (SPL); at 1kHz typical
CC-220: 96 dB ±3 dB (SPL); at 1kHz typical
Power
Maximum: 500mW
Impedance
CC-110 Headphone: 400 ohms ±30%; at 1kHz typical
CC-220: 200 ohms ±30%; at 1kHz typical
Microphone: 200 ohms ±30%; at 1kHz typical
Connector
Cable: 5ft (1.55m) long with 8-pin connector at headset end; 4-pin Female XLR





















Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.