/
Matrix: Can't get a FSII Transceiver Antenna to connect to a Matrix frame E-QUE card
Matrix: Can't get a FSII Transceiver Antenna to connect to a Matrix frame E-QUE card
- Administrator
Owned by Administrator
Apr 06, 2019
Question: My matrix is set up for FS II TA Antenna, the cable length right now is a short shielded patch cable connecting
the antenna directly to port one of the EQUE card and the front panel on the card has an amber light on port one illuminated
that goes away if I unplug the antenna. I did notice that there isn't an amber status light on the antenna, just the green power
light. Any thoughts on what I should try next or what I may be missing?
Answer: After getting the firmware report / Matrix overview log for the Matrix frame the issue is E-QUE card. The firmware
versions report in as:
E-QUE Mk 1 card
Application code - 2.0.35
FPGA code - 13
Boot code - 1.4
These versions are for a E-QUE card running ECS v5.1.3 firmware which is incompatible with the Eclipse EHX frame running
v8.5.1 firmware. The solution is to have the E-QUE card upgraded to support a Freespeak II application.
the antenna directly to port one of the EQUE card and the front panel on the card has an amber light on port one illuminated
that goes away if I unplug the antenna. I did notice that there isn't an amber status light on the antenna, just the green power
light. Any thoughts on what I should try next or what I may be missing?
Answer: After getting the firmware report / Matrix overview log for the Matrix frame the issue is E-QUE card. The firmware
versions report in as:
E-QUE Mk 1 card
Application code - 2.0.35
FPGA code - 13
Boot code - 1.4
These versions are for a E-QUE card running ECS v5.1.3 firmware which is incompatible with the Eclipse EHX frame running
v8.5.1 firmware. The solution is to have the E-QUE card upgraded to support a Freespeak II application.
, multiple selections available,
Related content
Matrix: Where should I fit the Fiber card in Eclipse Matrix ?
Matrix: Where should I fit the Fiber card in Eclipse Matrix ?
More like this
Matrix: How do I locate the Matrix Dongle ID (Hardware ID) number on a Eclipse frame?
Matrix: How do I locate the Matrix Dongle ID (Hardware ID) number on a Eclipse frame?
More like this
FSII-BASE-II Firmware Update Guide
FSII-BASE-II Firmware Update Guide
More like this
How do I mix E1 transceivers and IPT's on the same frame?
How do I mix E1 transceivers and IPT's on the same frame?
More like this
Matrix: What Trunking options are available on linked Eclipse frames?
Matrix: What Trunking options are available on linked Eclipse frames?
More like this
Arcadia : Call light on FSII BP is always flashing (blinking)
Arcadia : Call light on FSII BP is always flashing (blinking)
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.