/
Wireless: I am frequently getting a loud popping or clicking in the headsets when I a running next to 2.4Ghz lens control systems,

Wireless: I am frequently getting a loud popping or clicking in the headsets when I a running next to 2.4Ghz lens control systems,

Apr 06, 2019

I am frequently getting a loud popping or clicking in the headsets when I am running next to 2.4Ghz lens control systems and want to set the DX basestation into one of the  HI/ LO / ALL modes to avoid the interference.
See attached 
1) Turn the basestation on; the status window will display 8 for a few seconds; the 8 disappears the status window will be blank
2) Press and hold the CLEAR/BAND button,  and while you are still holding the CLEAR/BAND button, press and hold the REGISTER button
When the status window displays  L, H or A. Release both buttons 
3) Press the CLEAR/BAND button repeatedly to cycle through parts of the frequency bandL= low end, H= high end , A= all
Stop at the desired setting and wait until "c" appears on the status window display.
* note you will need to re-register any beltpacks 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.