/
Wireless: When does the Auto null on the DX210 need to be done?

Wireless: When does the Auto null on the DX210 need to be done?

Apr 06, 2019

Question: Does the Auto null on the DX210 need to be done each time the system is used after powering down, only when disconnected/reconnected to the wired system or only the first time it is used with the wired system?

Answer: Typically the auto null needs to be re-done if there is a major change to the 2wire setup, like adding/ removing wired PL units, changing the way the DX210 is connected to the system or connecting the DX210 to a different PL system. Generally if the auto-null is done once and the system is powered on/off then it does not need to be re-done
The auto null should also be done if you are hearing echo betweenthe wired side and the DX210 base user or wireless users..

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.