/
Wireless: Freespeak II beltpack serial number entry in FS II base Config Editor software
Wireless: Freespeak II beltpack serial number entry in FS II base Config Editor software
By Administrator
Apr 06, 2019
Question: If I register a FS II beltpack via over the air process I noticed that the serial number is not registered into the configuration editor software GUI beltpack tab screen. Do I have to manually enter this information into the software?
Answer: Yes, if FS II beltpacks are registered via OTA then the FS II config editor GUI will not "see" the registered beltpack's five digit serial number information. It will need to be manually entered into the beltpack tab screen as shown below. Beltpacks registered via the USB cable will auto populate the serial number information into the FS II config editor software beltpack tab screen.
In the Serial Num field (BP ID), enter the serial number of the beltpack. The beltpack serial number is a five digit number on a label on the bottom of the beltpack. This serial number can also be seen in the beltpack information menu.
Answer: Yes, if FS II beltpacks are registered via OTA then the FS II config editor GUI will not "see" the registered beltpack's five digit serial number information. It will need to be manually entered into the beltpack tab screen as shown below. Beltpacks registered via the USB cable will auto populate the serial number information into the FS II config editor software beltpack tab screen.
In the Serial Num field (BP ID), enter the serial number of the beltpack. The beltpack serial number is a five digit number on a label on the bottom of the beltpack. This serial number can also be seen in the beltpack information menu.
, multiple selections available,
Related content
Wireless: Freespeak II beltpack "System Connect" display screen messaging
Wireless: Freespeak II beltpack "System Connect" display screen messaging
More like this
Wireless: How can I access menus on a FSII beltpack when the menu access is disabled in software?
Wireless: How can I access menus on a FSII beltpack when the menu access is disabled in software?
More like this
Wireless: What functionality does a 7-pin XLR FSII beltpack provide?
Wireless: What functionality does a 7-pin XLR FSII beltpack provide?
More like this
Wireless: How do I register a FS II beltpack OTA (Over The Air) to Eclipse HX frame with E-QUE card
Wireless: How do I register a FS II beltpack OTA (Over The Air) to Eclipse HX frame with E-QUE card
More like this
How to: FreeSpeak Edge Belt Pack Volume Control
How to: FreeSpeak Edge Belt Pack Volume Control
More like this
Wireless: What system components do I need to replace to convert a CellCom system to a Freespeak II system?
Wireless: What system components do I need to replace to convert a CellCom system to a Freespeak II system?
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.