/
Digital Partyline: Audio level from matrix panels to HelixNet Beltpack is low how can I adjust

Digital Partyline: Audio level from matrix panels to HelixNet Beltpack is low how can I adjust

Apr 06, 2019

Question: I noticed on our HelixNet wired Belt Pack the audio level onearphone is low between Matrix panel and Helixnet BPThe Audio between Belt Pack to Belt Pack is ok, Only from i-station panel totheBelt Pack. From Belt Pack to i-station Panel, the audio level is ok. Only when i-station talk toBelt Pack we noticed that audio level is low.Please advice.
Answer: Youcould adjust either the 4-wire (audio) input of HelixNet Mainstation (try +6):OR increase the output of MVX port, see attached.
 
From the Helixnet Basestation In Menu mode, select ModuleSettings.  Toset the input level for the four-wire port: a)From the third menu (third display screen), select Input Gain. b)From the fourth menu (fourth display screen), select one of the following: •+12dB •+ 6dB. •0dB (default) •-6dB. •-12dB c) To confirm the selectedsetting, press the rotary control.   OR increase the outputof MVX port, see attached.

  File Modified

PDF File EHX 7.6 audio output gain steps.pdf EHX 7.6 audio output gain steps.pdf

Apr 06, 2019 by Administrator

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.