Matrix: How long does the matrix take to release a DynamEC (Production Maestro) Client
Question:
I have an Eclipse Matrix with 1x Production Maestro seat. However I want to use two PCs with the Production Maestro application installed . I will only use one PC at a time.
Example 1x Eclipse Matrix 2x DynamEC (DynamEC current name of Production Maestro - PM PRO) PC’s
The matrix is only licensed for 1x Production Maestro connection
If I connect with PC#1 , then close down / break the link How long do I have to wait before I can connect using PC#2?
Answer:
The Production Maestro PC polls the matrix every 60 seconds with a license re-acquire message If the matrix does not receive a re-acquire message after 130 secs then it drops the current license connection and a new PC-client can connect using DynamEC (Production Maestro)
Therefore when switching between Production Maestro PC#1 to PC#2 you should allow 2+mins before attempting to connect PC#2
Related content
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.