Matrix GPI For Port Mute
Question: Is itpossible to mute an output port by activation of a GPI on the Median HX matrix? I amlooking for an easy way to mute the studio speakers (for when using studiopaging fed through the intercom matrix with PGM+Talkback). Lookingthrough the EHX Software User Guide I could only find logic input options forthe GPIs on panels, not on the frame.
Answer: Yes. Steps:1) Program Feed PORT named PGM in thisexample with Forced Listen under Local Advanced
2) Create an inhibit talk Route for PGM.
3) Create a Control label MUTE PGM (can be any label that’s relevant) andattached route to assigned the Control
4) Go to GPI 1 and attached Control “Mute PGM"
5) Apply changes to Matrix withreset.
Please refer to attached document.
Answer: Yes. Steps:1) Program Feed PORT named PGM in thisexample with Forced Listen under Local Advanced
2) Create an inhibit talk Route for PGM.
3) Create a Control label MUTE PGM (can be any label that’s relevant) andattached route to assigned the Control
4) Go to GPI 1 and attached Control “Mute PGM"
5) Apply changes to Matrix withreset.
Please refer to attached document.
, multiple selections available,
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.