/
Matrix: EHX has detected an IP address conflict.

Matrix: EHX has detected an IP address conflict.

Apr 06, 2019

We are getting a warning box in EHX V8.8 (applies to other versions of EHX as well) that says: "EHX has detected that the current matrix uses an IP address that is also in use elsewhere in the project".

There are several areas in the configuration which have IP address settings. 

  • Check the CPU main and redundant IP address settings.

  • Check the IVC-32 card IP address settings (if this type of card is present).

  • Check the LMC-64 card IP address settings (if this type of card is present).

  • Check the E-DANTE card IP address settings (if this type of card is present) *Note that the E-DANTE card's IP address cannot be seen or changed in EHX as it is set using the Dante Controller software. 

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.