Helixnet: Having Helixnet transmit and receive audio problems when used on DHCP mode
When we put our Helixnet main station and speaker stations into DHCP mode we get loss of audio one way on some units
However if we take the same units and give them a fixed IP address of 192.168.42. xx and connect them to the same ethernet switches then we get no problems with audio in either direction.
Solution
All Helixnet devices should not be given an IP address 10.0.x.x (fixed IP or via DHCP) this can cause audio transmit and receive problems on the network as some of the 10.0.x.x addresses are reserved by some internal elements in the Helixnet digital domain.
However if we take the same units and give them a fixed IP address of 192.168.42. xx and connect them to the same ethernet switches then we get no problems with audio in either direction.
Solution
All Helixnet devices should not be given an IP address 10.0.x.x (fixed IP or via DHCP) this can cause audio transmit and receive problems on the network as some of the 10.0.x.x addresses are reserved by some internal elements in the Helixnet digital domain.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.