/
Wireless: Are the DX410 base station 2W ports terminated / unterminated?
Wireless: Are the DX410 base station 2W ports terminated / unterminated?
- Administrator
Owned by Administrator
Apr 06, 2019
As shipped from the factory DX410 base stations 2-wire ports are internally jumpered with the 200 ohm termination set to the "OFF" position. This requires that a 2-wire powered PL system (Clear-Com and RTS) be attached to the DX410 base station in order to use the 2-wire functionality of the base station.
If the base station is to be used in standalone mode with multiple bases connected together using the 2-wire ports to tie the audios together one base station will need the 2-wire ports terminated so that the 2-wire ports can be connected together. See pcb picture below for jumper locations and see chart describing what the jumpers functionality are.
If the base station is to be used in standalone mode with multiple bases connected together using the 2-wire ports to tie the audios together one base station will need the 2-wire ports terminated so that the 2-wire ports can be connected together. See pcb picture below for jumper locations and see chart describing what the jumpers functionality are.
, multiple selections available,
Related content
Wireless: Does the DX410 base station support 2w / 4W bridging?
Wireless: Does the DX410 base station support 2w / 4W bridging?
More like this
Wireless: Are the DX410 and DX210 BP and Base units compatible
Wireless: Are the DX410 and DX210 BP and Base units compatible
More like this
Wireless: DX200 base station 2-wire / 4-wire options
Wireless: DX200 base station 2-wire / 4-wire options
More like this
Wireless: Dx-300 (MB300) base station linking considerations
Wireless: Dx-300 (MB300) base station linking considerations
More like this
Wireless: Do you have a part number for the interface to connect a DX121 to the base station CS-702 ?
Wireless: Do you have a part number for the interface to connect a DX121 to the base station CS-702 ?
More like this
Wireless: What do the 4 dip switches inside a DX-200 basestation do
Wireless: What do the 4 dip switches inside a DX-200 basestation do
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.