/
Wireless: Connecting 2-wire and 4-wire audio sources to Tempest

Wireless: Connecting 2-wire and 4-wire audio sources to Tempest

Apr 06, 2019
Translate page

Can I connect an external intercom source to a Tempest channel 4-wire port and still link the audio between bases with the 2-wire (3-pin mic cable ports).
You can only select one 2-wire or one 4-wire on any given intercom channel but not both at the same time. If all 10 belts need to be on the same 4 intercom channels and connected to the Adam than you will need a total of 8 Adam ports.
If you have more than one Tempest base and you need to connect intercom using 4-wire, you must have a direct connection to the 4-wire port on every base (remember the base-link is to synchronize the RF).

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.