1)      Red Reset:To perform a red reset, use a paper clip pin and then push the pin into the System reset button.
2)      Bootstrapping Reset:(Panel rack software)To perform a bootstrapping reset is the combinations of the three switches: System reset button, Enter button and the Rotary encoder button.This will force to the panels to re-load the panel application software which is stored on board the matrix All panels will upload the new panel firmware that was downloaded to the Drake Pico matrix via Cmapsi
a) Use a paper clip pin and then push the pin into the System reset button keep holding the button, then press Enter button keep holding both button’s and then press the encoder button keep holding all the buttons.b) Release the System reset button and the Enter button and keep holding the encoder button.c) Release the encoder button when you hear the relay click.