/
Partyline: Can I connect a MS-702 to a Tempest base using XLR cable?

Partyline: Can I connect a MS-702 to a Tempest base using XLR cable?

Apr 06, 2019
Translate page

Yes, you can connect a Tempest base station to aMS-702 basestation via XLR cable.  On the Tempest front panel you need to selectthe channels, then select “2 Wire” mode.  This way audio will route via the 2-wire PL connection instead of the 4-wire port.

Note the Tempest 2wire PL connection does not provide power to the external PL (intercom) system. There must be a Clear-Com PSU unit or Master station in the external PL (intercom) system to provide power.   

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.