/
Wireless: Can I regress the app firmware on a CellCom Mark II beltpack?

Wireless: Can I regress the app firmware on a CellCom Mark II beltpack?

Apr 06, 2019

The 3kxxxxxx.mot firmware can be successfully regressed from the current 3k000214.mot version to an earlier version if the user has an older version of CellCom and wants to match a new beltpack to an existing system.  The user will need the firmware file for the existing beltpacks in order to accomplish this. 
You will need the following to accomplish: 1.       CellCom / Freespeak upgrader software program – available on the CellCom installation CD 2.       Beltpack registration cable

Clear-Com # PD4007 programming cable (9-pin dB to 3.5mm tip-ring-sleeve / jack), if you don’t have the cable, the wiring for this can be found in the CellCom user manual

 3.       The 3kxxxxxx.mot firmware file for the BP in question Attached below are the instructions on how to upgrade (or in this case regress) the beltpack. 

  File Modified

PDF File CellCom beltpack upgrader instructions.pdf CellCom beltpack upgrader instructions.pdf

Apr 06, 2019 by Administrator

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.