/
Wireless: When using a DX210 system Is there a way to disable channel B in the headset/beltpac if the base is only wired for channel A

Wireless: When using a DX210 system Is there a way to disable channel B in the headset/beltpac if the base is only wired for channel A

Apr 06, 2019
Translate page

When using a DX210 wireless dual chnl wireless system If you want all of the headset/beltpacs with channelB disabled simply switch the base into single chnl mode. This will disable the 2ndchannel function on the base. There is currently no way to disable a channelselect button on a communicator/beltpac while the base is in dual mode with the exception of the ISO button.  If you are wantingto use both channels on the DX210 but wish certain users to access only channelA, I would suggest using the BP200 beltpac. It is a single channel beltpac anddefaults to Channel A. 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.