/
Wireless: WTR-670 beltpack generates noise when turned on
Wireless: WTR-670 beltpack generates noise when turned on
By Administrator
Apr 06, 2019
Check that each WTR-670 beltpack is programmed to a different channel in the same group. If four beltpacks are used each beltpack must be programmed to a different channel in the same group.
If two beltpacks are on the same group/channel they will in essence be on the same frequency and will intermod with each other generating an audible oscillation and distorted audio depending on how far the packs are from one another and the base station.
Verify in the LCD programming window that the packs are on different channels, that is 03A ch 1 on one beltpack and 03A ch 2 on the other beltpack. See screen shot below.
If two beltpacks are on the same group/channel they will in essence be on the same frequency and will intermod with each other generating an audible oscillation and distorted audio depending on how far the packs are from one another and the base station.
Verify in the LCD programming window that the packs are on different channels, that is 03A ch 1 on one beltpack and 03A ch 2 on the other beltpack. See screen shot below.
, multiple selections available,
Related content
Wireless: WTR-680 Beltpack interferes with other packs in WBS system
Wireless: WTR-680 Beltpack interferes with other packs in WBS system
More like this
Wireless: What are the differences between the WTR-670, WTR-680 and WTR-682 beltpacks?
Wireless: What are the differences between the WTR-670, WTR-680 and WTR-682 beltpacks?
More like this
Why are my 2 channel belt packs howling?
Why are my 2 channel belt packs howling?
More like this
Wireless: Can I use more than 4 WTR-670 beltpacks on a WBS-670 base station?
Wireless: Can I use more than 4 WTR-670 beltpacks on a WBS-670 base station?
More like this
Wireless: WTR-670 not working full duplex mode (talk and listen)
Wireless: WTR-670 not working full duplex mode (talk and listen)
More like this
Wireless: DX beltpack - BP200, BP210, BP300 sidetone is distorted
Wireless: DX beltpack - BP200, BP210, BP300 sidetone is distorted
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.