Wireless: Can I use a Telex ALP-450 directional antenna on the WBS-670 / 680 Base station?
The Telex ALP-450 directional UHF antenna can be used on the WBS wireless intercom base station. The antenna has a TNC connector and the antenna operates between 450 - 900 MHz which makes it compatible with the following WBS-670 / 680 bands: A2, B4, C3, C6, E88 and G9 bands. The antenna has a passive gain figure of 4.6 dBi. This would allow for up to 100 ft (30m) of low loss coaxial cable to be used with the antenna when it is remotely connected to a WBS-670 / 680 base station.
Note Clear-Com does not sell this part, you have to purchase it from Telex directly
The data sheet for the antenna is attached below.
Note Clear-Com does not sell this part, you have to purchase it from Telex directly
The data sheet for the antenna is attached below.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.