/
Matrix: How do I breakout audio directly from an Eclipse MVX-16 port to 3-pin XLRs?

Matrix: How do I breakout audio directly from an Eclipse MVX-16 port to 3-pin XLRs?

Apr 06, 2019
Translate page

Question:  I need to breakout audio directly from an Eclipse matrix frame MVX-A16 port out to 3-pin XLR connectors, one male and one female.  Can you provided the wiring details that will allow me to create a cable for this purpose?
Answer:  See the drawing below for wiring instructions, this will allow you to inject balanced audio into the Eclipse frame and to take balanced audio from the Eclipse frame and route it to a 3rd party device like a mixing console. 
The breakout cable is also an excellent tool for testing audio into and out of a MVX-A16 port, the cable can be connected to a Radio Designs Labs PT-AMG-2 audio tester.
This solution is also attached below as a PDF document. 



















CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.