Partyline: Excessive crosstalk on partyline system
There many causes to excessive crosstalk on a PL system
Cause 1: High DC resistance in ground return.
Solution 1: Use heavier cable; add additional conductor(s) to ground return.
Cause 2: MULTI-CHANNEL cable pairs are not individually shielded.
Solution 2: Replace cable with individually shield pairs.
Cause 3: Headset cables are not wired properly or shielded properly.
Solution 3: Correct wiring. Use headsets with properly shielded wiring. Make sure the mic pair are individually shielded
Cause 1: High DC resistance in ground return.
Solution 1: Use heavier cable; add additional conductor(s) to ground return.
Cause 2: MULTI-CHANNEL cable pairs are not individually shielded.
Solution 2: Replace cable with individually shield pairs.
Cause 3: Headset cables are not wired properly or shielded properly.
Solution 3: Correct wiring. Use headsets with properly shielded wiring. Make sure the mic pair are individually shielded
, multiple selections available, Use left or right arrow keys to navigate selected items
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.