/
Matrix: How can I quickly test an E-Dante card in a Eclipse frame?

Matrix: How can I quickly test an E-Dante card in a Eclipse frame?

Apr 06, 2019

Several quick configurations can be created using Eclipse HX software and with Dante Virtual Soundcard. 
Make sure you have a PC with Dante controller and Dante virtual sound card installed
Connect your PC and E-Dante64 card to a Gigabit switch and setup suitable IP address for both
1.  Simple self audio test on an E-Dante card port - Create a port, place talk and listen keys on a panel, use Dante
controller software to make a subscription on that port, user should hear their own audio when the talk / listen keys are
active.
2.  Use Media Player to generate a listen on a E-Dante listen port - Use Dante Virtual Soundcard, open PC Media
Player and make subscription from DVS to E-Dante card using Dante Controller. Two channels of audio can be heard
at a panel.
3.  Generate a Talk from an Eclipse panel to PC speakers - Use DVS to route Eclipse panel talk to PC speakers via
Dante Controller subscription from E-Dante transmit channel to DVS receive channel
4.  Route (Program) audio from Eclipse frame to E-Dante port - Create a forced listen from audio source to a E-Dante
port, then in Dante Controller create a subscription from E-Dante transmit to receive channel and place EHX port LISTEN  label
on a panel.  You should hear the audio source on the panel

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.