Wireless IFB: How do I adjust the block 26 frequencies on my PRC-2 receiver?
The PRC-2 receiver on block 26 is capable of being tuned from 665.600Mhz to 691.100Mhz in 100Khz increments using the two rotary switches recessed under the slide door cover on the side of the receiver. See the picture below for the location of the two rotary switches.
The left hand rotary switch adjusts frequences in 1.6Mhz increments, the right hand switch adjusts frequencies in 100Khz increments. The switches are both labeled from 0 to F, using the attached chart below the user can manually adjust the frequency of a block 26 receiver to match the frequency of a block 26 PTX-2 or PTX-3 IFB transmitter.
The left hand rotary switch adjusts frequences in 1.6Mhz increments, the right hand switch adjusts frequencies in 100Khz increments. The switches are both labeled from 0 to F, using the attached chart below the user can manually adjust the frequency of a block 26 receiver to match the frequency of a block 26 PTX-2 or PTX-3 IFB transmitter.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.