/
Matrix: Can the TEL-14 telephone hybrid work as stand alone unit

Matrix: Can the TEL-14 telephone hybrid work as stand alone unit

Apr 06, 2019
Translate page

If you need stand alone telephone hybrid then the Clear-Com TEL-14 unit can be used as a stand alone unitThe TEL-14 is a 2 channel telephone hybrid with a 4wire connection to external devices (Intercom matrices , sound desks etc..), it also has auto-nulling and level control trim pots.
The TEL-14 needs to be housed in a interface frame either a IMF-3 (with 11 chassis slots) or a IMF-102 (with 2 chassis slots) The TEL-14 can be connected directly using a straight CAT5 cable to Clear-Com Eclipse Omega / Median / Pico matrices as well the older Matrix Plus 3 matrices
The TEL-14 connects only to a ANALOGUE (FAX) phone line.If working in standalone mode make sure to connect the TX data pair to the RX data pair on the "matrix" RJ45 connector of the TEL-14 unit This setup will answer incoming calls , If the customer wants to dial out , they will need to place a parallel phone next to the TEL-14; make the call on the standard handset and then push the "off hook" button on the TEL-14 to hold the line up

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.