/
PA: Registering a Secondary DX-series base station to a Primary

PA: Registering a Secondary DX-series base station to a Primary

Apr 06, 2019

We want to register base2 (secondary) to base1 (primary). This step is not necessary but advisable so that the two bases do not interfere with each other. To do this, the cover of the DX200 has to come off and dipswitch 4 must be set to "on" or "up" on the transceiver board of base2. Once this is done and power is turned on for base 2, it will come up with 2 lines on the display, letting you know that it is a secondary base waiting to be registered to a primary base. Press the registration button on the primary. Next press the registration button on the secondary base until a "2" comes on the display and wait. When the secondary base successfully registers, a single line will come on the display of the secondary base. Next, connect the two bases, AUX IN (base1) to AUX OUT (base2) and AUX OUT (base1) to AUX IN (base2). Terminate one of the bases. Lastly, press the ISO+ button on the front of the base. This will allow all the headsets to talk to each other on the ISO channel (button) not the IC button.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.