Partyline: Sony NiPROS DS-560 camera CCUs wired directly to a MS-702 main station
Question: Can I wire up a Sony NiPROS DS-560 camera CCU to a Clear-Com party-line system via the 3-pin XLR connector? Will it support multiple CCUs in this configuration?
Answer: One DS-560 camera CCU can be wired directly to a Clear-Com party-line system using 3-pin XLR cable. The party-line system can typically support one camera CCU in this configuration due to the camera impedance on on the party-line channel. Adding more than one CCU in this configuration will load down the PL audio down making the PL audio low and unusable.
Clear-Com always recommends that when connecting camera CCU's from any manufacturer to our Partyline system. The best solution is to set the camera CCU into 4wire mode and convert from 4wire to 2wire using our IF4W4 interface unit (http://www.clearcom.com/product/partyline/interfaces/if4w4)
See below the diagram for connecting ONE camera CCU to the PL main station.
Answer: One DS-560 camera CCU can be wired directly to a Clear-Com party-line system using 3-pin XLR cable. The party-line system can typically support one camera CCU in this configuration due to the camera impedance on on the party-line channel. Adding more than one CCU in this configuration will load down the PL audio down making the PL audio low and unusable.
Clear-Com always recommends that when connecting camera CCU's from any manufacturer to our Partyline system. The best solution is to set the camera CCU into 4wire mode and convert from 4wire to 2wire using our IF4W4 interface unit (http://www.clearcom.com/product/partyline/interfaces/if4w4)
See below the diagram for connecting ONE camera CCU to the PL main station.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.