/
Wireless: Freespeak Antenna Status LED

Wireless: Freespeak Antenna Status LED

Apr 06, 2019

Question: My antenna splitter has a lit LED on port 2. The antenna connected to port 2 does not have a yellow LED present. How can this happen?
Answer: The LED gives the status of the receive data to a given port. So while the splitter may be receiving data from the antenna in port 2, the antenna is not receiving data from the splitter. This could be due to a poor termination (of the RJ45 connector) or issue with the cable.Freespeak II antennas will not transmit data back to the splitter until they receive signal so this scenario would not happen with a Freespeak II system.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.