/
Matrix: Can I transfer a Micro-Matrix config file to a Compact 72 frame?

Matrix: Can I transfer a Micro-Matrix config file to a Compact 72 frame?

Apr 06, 2019

Question:  We have an old Matrix 24 frame and received a hand me down Matrix 3 plus 72 from one of our sister stations.
We use the matrix 3+ software to configure the Matrix 24. Is there an easy way to move the config's to the Matrix 3+ 72 frame?
Answer:  You should be able to save the current Matrix +3 configuration file from the Micro-Matrix frame as a .CFG file. 
Open the saved config file in the new frame, then from the Setup screen select the Systems Preferences tab.   In Systems
Settings the frame should now report as a Compact 72.  If it doesn’t then use the pull down tab and select “Compact 72” as
the frame type and apply the change. 
When the saved .CFG file in the Compact 72 frame is opened the change will happen automatically and you will see the first 24
ports programmed as they were in the 24 port frame provided the cards are of the same type between the two frames.   The
remaining 48 ports will be blank and require programming.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.