/
Wireless: Changing FSII Belt pack roles between 2 different Matrices / Basestation

Wireless: Changing FSII Belt pack roles between 2 different Matrices / Basestation

Apr 06, 2019
Translate page

I have a requirement to use1x BP on two different matrices. Can it roam across two different matrices
Solution
A BP can only be connected to one matrix / basestation at a time and use the antennas connected to that particular matrix. It cannot roam across two different matrices.
However you can register a BP to two different matrices / basestations and allow the BP user to switch from matrix #1 to matrix #2
This solution contains information about how to swap/change between FSII beltpack roles and how to connect to different matrices if desired
The details of this solution are contained in the attached file
Note:
1. the BP must be registered to both systems
2. the BP can only connect to one system at a time
3. in the system connect screen
V= Visible (the system is visible in the RF space)
C= connected (the current matrix your BP is connected to)
R = registered (your BP has been registered before to this matrix )
When switching from matrix #1 you will see V---C (in the system connected screen)
Select matrix # X which should be showing  V---R (allows you to switch connection to this matrix)

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.